Borambola Station Building - 2

Borambola Station and a platform diorama

At the last post, I was left with the fabrication of the roof, and painting 

A sneak preview of the finished model.  Picture taken from my backyard.  Our rescue horse Sammy, has photobombed the picture, but does show a scene that would be possible with photo backdrops on a model layout.  Read on to find out how I got to this stage.

Station building completion

Painting finished.  Some weathering needed.  The guttering downpipe is already in place, and the roof is removeable.  I had to use a flash to show up the inside seating

 Finishing the station turned out to be rather faster than expected, so I decided to place it on a small diorama

Platform, and diorama

I recently made a few platforms faces, and used the small styrene platform as the basis for my model.  It is shorter than the prototype, but it fitted my other criteria:- easier to store; space for the water tower, and toilet blocks; may be able to be installed as is on the future layout; and lastly, I had a piece of plywood of appropriate size hanging around.

Platform pieces assembled, and spray painted with a mix of Tamiya "Red Brown" and Tamiya "medium Grey"

0.040 Styrene sheet added for the platform and support.  A small rebate on the rear of the platform top made to allow the station building to sit correctly. 

Station and platform with the polystyrene on the plywood surface.  The track at this stage is removeable.

I use a hot wire forming tool to roughly shape the polystyrene without too much mess.  Although, the final shape is achieved with a course sandpaper, and a vacuum cleaner to suck up the white dust

Sculptamould mixed and applied to give some texture.  Whilst this is was wet, some brown grout sprinkled on

Station placed on the diorama base.  

I covered many of my scenery techniques in my series on the Bethungra N scale layout a year ago, so I am not going to repeat them here.  (search for it in the search area on the top RHS of this blogpage)  But I will mention, the visible white sytrene platform top is lower than the platform edge capping, which gives me around 1mm of depth for the sand layer on top of the platform

Little details

Search as I could, I could not find my NSWGR resin water tanks.  So the option was to make ones own out of styrene and aluminium.  

Three blank styrene discs whittled from sheet styrene.  Then Brunel Models corrugated iron making tool used to make the tank, and progressively rolled around smaller and smaller diameter tubes to get it sized right 

Strip styrene used for the base.  Tank painted with Tamiya flat aluminium

Downpipe off the station will be fitted once the tank is installed on the diorama

The station was reported to have the station name over the doorway.  I was not sure what size it needed to be, so I made a small word document with different sized fonts, and printed it on paper.  Styrene cement used to glue the paper to styrene, and I had 2 signs to check

Both signs would be suitable, although the larger sign was selected

Finally the photos

Tuesday was the last day of winter, although I suspect spring came early.  The canola fields in the background has been out for around 3 weeks.  I set up the portable table in my backyard, and used the sunlight to illuminate the scene.  The only tweaking I have done, was cropping the images.  

Weathering on the station, but none on the water tank.  This will be corrected when I also fix the unwanted angled water tank deck.  The station platform top is fine sand, with a dusting of earth coloured plaster - TUFT brand which hasn't been available for over 30 years.  Grass foliage is Woodland scenics, and Faller.  (I must learn how to do static grass at some stage.)

A railmotor provided the passenger service on the Tumbarumba branch to 1974.  The angle of the sun in this picture would be correct for the prototype station in late afternoon.  The CPH railmotor is a Samhongsa brass import imported by Bergs Hobbies over 30 years ago.  

Hope you all are staying sane during this lockdown.  Stay safe, and build a model or two.

Until next time

A visit to Cooma

A visit to Cooma

Last week, I was returning back to Junee from the coast, and decided that I would break the journey at Cooma, and have a look around the railway station.

In happier times, the ARHS (ACT Division) ran a train of 3 railmotors to Cooma in 1987.  Here they are at the station

When I lived in the ACT area,  I visited Cooma regularly, but  normally on my way to somewhere else, and almost always in a hurry.  This was my first opportunity with a digital camera, and time to explore.

Cooma station is on the branch line, south of Goulburn.  The station was opened in 1889, and as befitting an important station, received a Whitton station building.  An extension of the line south of Cooma reached Nimmitabel in 1912, and finally to Bombala in 1921 (the same year as the line reached Tumbarumba).  Services south of Cooma ceased in 1986, and the last trains to Cooma finished in 1989 - just in time for the station' Centenary.

The line was built for agriculture - livestock, timber, and wool were the main outgoing commodities, although the Snowy Mountains Scheme used the line in the 1950s-70s for transportation of much material needed for dam construction

The "closure" of the line was blamed on the standard of the bridge at Numeralla, although the railways were looking for an excuse to shutdown unprofitable lines.

The Cooma Monaro Railway group has taken over the Cooma station, and lines north and south. They were running CPH railmotor trains about 10km north to Chakola until a few years ago.  More information on the  group at the website  http://www.cmrailway.org.au/

What has Cooma got to do with Wagga?

As the railway to Cooma closed before any major rationalization of the station, the station and its surrounds are effectively a time capsule.  There are many details that would have disappeared from Wagga, that could be seen at Cooma, particularly the signalling.  Anyway, I hope you enjoy this excursion further up the mountains

Looking south.

Station rear - a container and a skip are indications that there is work occuring by the CMR volunteers on refurbishing the station

In 1987, the rear of the station looked like this.  Note The lineside poles serving the signal box, have gone in the recent picture

Signal frame in the Cooma Signal box. Colours are red for signals, blue for locks, and black for points.

Platform scales

original type luggage cart

Platform seat

The CMR group had installed a number of descriptive plaques around the station, and yard to identify specific items.  Whilst slightly water damaged, the plaques had excellent information.

Part of the fueling point.

Another of my 1987 pictures shows the standard of the fueling point when it WAS in service.  Whilst  the plaque pictured above mentions the 12000 gallon diesel tank, it isn't there now.  

Buffer at the dock may be similar to the one that has disappeared from Wagga

Engine Shed, signal, water column, water tank and paybus.  The coal stage is out of sight at the other end of the engine shed

Barracks - or Crew quarters.

"Loco"

Goods shed

Another view of the engine shed.  I understand that the CMR's CPH railmotors are stored in here

Just to the south of the station, the line crosses the Polo Flat road.  Polo Flat was once the site of the transshipment for  Snowy Mountains Scheme equipment, and supply delivery

FP11 Paybus.  Looking a lot worse for wear.

Water Column.  This is the style used on the Tumbaumba branch

Signal details

Signal details

Signal details

This signal is similar to the ones removed in 1983 at Wagga

Compensation pivots used to even out the effects of temperature changes in point rodding.  May only be a small thing in modelling, but their inclusion will do much for making a scene authentic.  Note, they are not always painted silver

Point throw, and point indicator

Much of the signal wires were supported on these posts, and pulleys

The 1987 railmotor tour crosses Ingalara Creek on the railway north of Cooma.  The bridges over this creek, Bredbo River, and Numeralla River were significant structures.  

The 1987 railmotor tour on the line north of Cooma. 
 The ARHS ran these railmotors on many of the NSW branch lines in 1987, on their 'Farewell Southern Branchline" tour.  One of these was the Tumbarumba line, out as far at Ladysmith.  The railmotors were I believe was the last train on the line

As a passenger on a rail tour, often one gets a chance for a photo run-by.  All the interested passengers will get off the train, and form a photo line.  The train will then backup a distance, before returning.  Before the use of video cameras, this was normally a quick process.  Now with video cameras, and mobile phones, the train had to back off a long distance, and continue steaming well after the last carriage has disappeared out of the view finder.  Anyway, here are the happy people scrambling back to the train after a successful photo run-by .  I am glad I finally get to share these images

Until next time.  Drive safely this Easter