Saturday, 25 July 2020

Sidings beyond Docker Street




Beyond Docker Street

When I was designing my layout based on Wagga Wagga, I was interested in including as many industries as possible.   The track between Docker, and Urana street contained the following possibilities
  - Showground
        - Willis Bricks
        - Hardy’s Timber
        - Gasworks
        - LPG depot
        -Trucking yards.

In 1954, the Wagga Daily Advertiser published a photo showing the Trucking Yards, and the showground platform, and entry gates.  Whilst the showground is not being modelled, the trucking yards (sheep on the left of the picture, cattle on the right) were essentially unchanged  until removal after 1979


A not to scale sketch showing the trackplan and associated sidings
1971 Aerial view shows the actual sidings.  Quite a number of wagons can be seen - mostly bogie stock wagons, and a number of BCHs on the gasworks siding

By 1990, the trucking yards were gone, and the only evidence of the siding to the gasworks is the curved fence on Hardys timber. Willis Bricks pit looks about the same size, so I don't know if it was still operational. Hardys timber has more buildings, and the LPG depot also has a few more structures



The showground
A recent article appeared in the November 2019 Australia Railway History magazine, describing the showground siding, and operation.  This siding was well out of use by 1970, and lacking any photographic remains by 1970, I will not be including it

Willis Bricks
A siding was laid for Willis Bricks in the 1930s according to my research.  Willis Bricks was a major brickworks for Wagga, including its own small tramway system.   The 1954 Daily Advertiser photo does not show a siding, so perhaps the earlier information was in error.  In any case, I have not been able to discover if or when they used the railways to  transport their bricks, and whilst modellers licence could be used, I do not plan to include it


The 1954 Daily Advertiser image of the brick pit shows the tramway incline


Hardys Timber
A siding was used by Hardys Timber until sometime after 1970s.  There were 2 major sawmills on the Tumbarumba branch:- at Humula, and Tumbarumba that sent cut timber by rail – and I expect that one of the destinations was Hardys.  Having both the sawmills, and the receiving/retail outlet included on the one layout is a significant bonus for operation

Hardys timber in 1954 shows neatly stacked lumber.  Note The line of 4 wheel stockcars in the sidings


Gas Works
A new gasworks was established in 1964, and a point was laid off the Hardys timber siding for an extended siding.  As is common with coal gasworks, there was incoming coal wagons, and one of the byproducts of coal gas production is coke.  The gasworks was being decommissioned when I photographed it in the 1990s, but I did note 3 chutes above the then removed siding – which I assume was for the coke.   The gasworks siding was drawn in 1962s plans with a loop for a loco to run around the coal wagons.  I am not sure if this was done, as my 1970 aerial picture is not clear

Closeup of the 1971 aerial view -shows the line of BCH awaiting to be unloaded.  The LPG depot is in the bottom of this image

One of the gasworks structures, with the enlarged LPG depot in the RHS foreground
Out of use, the main retort building
The third major structure, with the gasometer in the background
The only picture I have showing the northernside of the gasworks.  This is the side that people viewing my layout will see.  This image is proudly displayed in Wagga Motors office waiting room.  It is often unusual sources that give unusual angles



LPG Depot
Opposite the gasworks, a large LPG depot was established.  This was prior to 1970.  The LPG depot seems to have its own siding – assuming that the former gasworks loop was not in use.  Most of this is speculative, as whilst I have photos of the depot, the 1970s aerial picture only hints at unloading pipework. But, I am fairly sure it did exist, as in a recent talk at the Epping club, David Lowe reported on the movement of Speed E Gas tankers thru Goulburn, as far as Wagga.

Here is the original shed as seen in the 1971 aerial image.  The other sheds in the RHS background are later additions


Trucking yards
Wagga Wagga was, and still is,  a major selling centre for sheep, and cattle.  Line side trucking yards were established, and fairly large trains could be handled, and stored on the adjacent sidings.   The saleyard complex in Wagga at the time was on Travers Street, so stock was moved to/from these yards by road.
The movement of sheep and cattle wagons will be a major focus of my model train operation.  I plan to model these trucking yards, as well as stockyards at the Bomen abattoir, and stock loading on the Tumbarumba branch at Borambola, Humula, and Tumbarumba. 
New stockyards  were built in Bomen by 1979, and the Wagga stockyards, and trucking yards were removed. 

The Pig trucking yard was closest to Urana Street

The 1971 aerial view is virtually unchanged from the 1954 Daily Advertiser photo.  The double stock race for sheep is to allow for loading on the 2 decks of the sheep vans



Operation
Whilst it is possible that stock trains could have entered the trucking sidings directly off the mainline, my only picture of a stocktrain in Wagga shows the X203 shunting engine with a number of CW wagons heading towards Docker Street.  I also have pictures of coal wagons in the Wagga sidings.  So, I am going to make assumptions – all trains with wagons for the Docker Street sidings are disassembled in the main Wagga yard, and are moved from there to the Docker street sidings by the X200 shunting engine, avoiding any timetabled mainline trains



Modelling notes. 
Wagons.  All the industries I hope to include, have specific wagons.
-        SDS Models have produced the Speed-E-Gas wagon, and I have acquired a small number for the LPG depot. 

-        Coal Wagons for the gas works are fairly common.  I made quite a number of  AR Kits coal wagons in the 1980s/90s, and recently acquired some Hi_Rail BCH wagons.

Phil Sloan photo from the 1970s shows a number of coal hoppers, and BSVs parked on the Wagga station sidings



-        Stock trains will be a feature.   I own a small fleet of Eureka,  SDS, and Columba bogie BCW cattle wagons, and a few Eureka BSV bogie sheep vans.  Plus a pack of Austrains 4 CW cattle wagons. In addition, I have also made a number of Casula, and Minimodel kits

My photo  - BSV in Wagga around 1980.



-   
Keith Waine picture around 1967, shows X203 with a long rake of CW vans heading west towards the trucking yard sidings
Timber loads can be placed in S trucks, although I admit, I will have to do more research to find other wagon types used for sawn timber loads.  Photos would be helpful


Baseboards.  The space I have allocated between the two level crossings is around 6 metres long x 600mm wide.  I am hoping that I will be able to include the 4 industries above, although to limit the space, I will be leaving out the Pig stock races, moving the sheep, and cattle races closer to Urana Street, modifing the trackplan, and relocate the LPG depot and gasworks structure so it appears a lot sooner after Hardy’s timber.   
=================================

Aerial shots are nice, but the lineside also needs some details.  Tony McIlwain went to the nearby teachers college in Wagga in the 1960s, and has managed to fill in a lot of gaps in my knowledge with infrastructure.  I will leave you with these gems.  Happy modelling

Tony McIlwain photographed many trains around Wagga in 1962/63, and shared the images with me.  Here is a diesel hauled goods train approaching Docker Street.  The Hardys siding point is in the foreground, and the trucking sidings are in the distance

Another Tony McIlwain picture, showing a up passenger train (Sydney express?)  approaching Docker Street in 1962?

Tony McIlwain photo showing 3813 and passenger train about to cross the Urana Street crossing.  The buffer stop for the trucking yard sidings is in shot.  I think the van is an FHG, stored here whilst the stock wagons are loaded/unloaded


3 comments:

  1. Very informative post - brings back a lot of memories.

    ReplyDelete
  2. Fantastic post Rob. Loved the history of the gas works at Wagga, I'd been trying to find information on how/where/when gas tankers were railed around NSW, as I'd seen an NTHF tanker sitting in the old Boral siding at Coffs Harbour in an early 1990's film. I'm glad you'll be able to model the LPG siding, it will make for an interesting operating feature on your layout. Looking forward to more updates!

    ReplyDelete
  3. Thanks Phil. Appreciate your interest. One of the benefits of this blog, is that I have come into contact with many knowledgeable people, who have greatly enhanced my research. Wagga has been quite a surprise to me with the mix of industry sidings. I haven't explored all of them yet, and I hope to have articles on these over the next year: by then, with luck, benchwork on the layout will have started.

    ReplyDelete